Corrosion resistance of MgO-C bricks: analysis of the purity and the grain size of electrofused magnesia aggregates

Authors

  • Yamila Soledad Lagorio Departamento Metalurgia y Centro de Desarrollo y Tecnología de Materiales (DEYTEMA), Facultad Regional San Nicolás, Universidad Tecnológica Nacional - Argentina
  • Edgardo Benavidez Departamento Metalurgia y Centro de Desarrollo y Tecnología de Materiales (DEYTEMA), Facultad Regional San Nicolás, Universidad Tecnológica Nacional - Argentina

DOI:

https://doi.org/10.33414/rtyc.49.68-82.2024

Keywords:

ceramics, refractories, MgO-C, slags, corrosion

Abstract

Three different qualities of MgO-C refractory bricks were formulated modifying only the purity and the grain size of magnesia. The mechanisms and degree of chemical attack of the three MgO-C bricks, developed at 1600°C, by contact with a steelmaking slag were analyzed. According to the observations made throughout the corrosion profile, it is established that the mechanisms of chemical attack of the slag were: (i) infiltration of the liquid slag through the open pores, (ii) penetration of the magnesia particles by iron ions, and (iii) reaction between the liquid slag and the secondary phases located at the grain boundaries of the MgO aggregates. Corrosion resistance increased when the magnesia aggregates had a larger grain size, a lower impurity content and a higher CaO/SiO2 ratio between the grain boundaries.

Downloads

Download data is not yet available.

References

Akselrod, L. M., Maryasev, I. G., Platonov, A. A., Melnikova, D. R. (2014). Improvement of Methods of Fused Periclase Crystal Size Determination. Refractories Worldforum, 6, 66-71.

Atzenhofer, C. y Harmuth, H. (2021). Phase formation in MgO-C refractories with different antioxidants. Journal of the European Ceramic Society, 41, 14, 7330-7338. doi.org/10.1016/j.jeurceramsoc.2021.07.023.

Baudín C., Alvarez C., Moore R. E. (1999). Influence of Chemical Reactions in Magnesia–Graphite Refractories: I,Effects on Texture and High-Temperature Mechanical Properties. Journal of the American Ceramic Society, 82, 3529–3538. doi.org/10.1111/j.1151-2916.1999.tb02276.x

Benavidez, E., Brandaleze, E., Musante, L., Galliano, P. (2014). Microstructures and Corrosion Mechanisms in MgO-C Bricks in Contact with High-Basicity and FeO-Rich Slags. Advances in Science and Technology, 92, 282-287. doi.org/10.4028/www.scientific.net/ast.92.282.

Benavidez, E., Brandaleze, E., Musante, L., Galliano, P. (2015). Corrosion Study of MgO-C Bricks in Contact with a Steelmaking Slag. Procedia Materials Science, 8, 228-235. doi.org/10.1016/j.mspro.2015.04.068.

Cheng, Y., Zhu, T., Li, Y., Sang, S. (2021). Microstructure and properties of MgO–C refractory with different carbon contents. Ceramics International, 47, 2, 2538-2546. doi.org/10.1016/j.ceramint.2020.09.099.

Bragança, S. R. (2012). Corrosão de refratários utilizados na siderurgia. Parte I: propriedades microestruturais. Cerâmica, 58 (347), 280-285. doi.org/10.1590/S0366-69132012000300002.

Han, B., Ke, C., Wei, Y., Yan, W., Wang, C., Chen, F., Li, N. (2015). Degradation of MgO–C refractories corroded by SiO2–Fe2O3–V2O5–TiO2–MnO–MgO slag. Ceramics International, 41, 9, Part A, 10966-10973. doi.org/10.1016/j.ceramint.2015.05.040.

Jansson, S., Bravie, V, and Bohlin, L. (2004). Corrosion mechanism and kinetic behaviour of refractory materials in contact with CaO-Al2O3-MgO-SiO2 slags. VII International Conference on Molten Slags Fluxes and Salts, The South African Institute of Mining and Metallurgy.

Landy, R. A. (2004). Magnesia Refractories. En C. A. Schacht (Ed.), Refractories Handbook (109-149). Marcel Dekker, Inc.

Lee, W. E. and Zhang, S. (1999). Melt corrosion of oxide and oxide–carbon refractories, International Materials Reviews, 44:3, 77-104. DOI: 10.1179/095066099101528234.

Liu, Z.; Yu, J.; Yang, X.; Jin, E.; Yuan, L. (2018). Oxidation Resistance and Wetting Behavior of MgO-C Refractories: Effect of Carbon Content. Materials, 11, 6, 883. doi.org/10.3390/ma11060883.

Liu, Y., Wang, Q., Li, G., Zhang, J., Yan, W., Huang, A. (2020). Effect of carbon content on the oxidation resistance and kinetics of MgO-C refractory with the addition of Al powder. Ceramics International, 46, 6, 3091-3098. doi.org/10.1016/j.ceramint.2019.11.250

Poirier, J., Bouchetou, M.L., Pringent, P., Berjonneau, J. (2007). An over view of refractory corrosion: observations, mechanisms and thermodynamic modeling. Refractories Applications Transaction,3, 2, 2–12.

Zhang, S., Marriott, N.J., Lee, W.E. (2001). Thermochemistry and microstructures of MgO-C refractories containing various antioxidants. Journal of the European Ceramic Society, 21, 1037-1047.

Zhang, S., Sarpoolaky, H., Marriott, N.J. and Lee, W.E. (2000). British Ceramic Transactions, vol. 99, 6, 248-255. http://dx.doi.org/10.1179/096797800681036

Zhu, T.B., Li, Y.W., Sang, S.B., Jin, S.L. (2016). The Influence of Al and Si Additives on the Microstructure and Mechanical Properties of Low-Carbon MgO-C Refractories. Journal of Ceramic Science and Technology, 7, 1,127-134. 10.4416/JCST2015-00055.

Published

2024-04-29

How to Cite

Lagorio, Y. S., & Benavidez, E. R. (2024). Corrosion resistance of MgO-C bricks: analysis of the purity and the grain size of electrofused magnesia aggregates. Technology and Science Magazine, (49), 68–82. https://doi.org/10.33414/rtyc.49.68-82.2024